2027 CIE 20/40 SL COMBO TRIDEM CIE2040SLFTJAX Web

20/40' SL Combo Tridem FET INCLUDED IN THIS PRICE! 1.Function Carries one (1) 20' loaded, one (1) 40' loaded or two (2) 20' empty ISO containers. Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE and TTMA specifications 2.General Overall Length: 40' 11" extended/ 31' 7" retracted (Excluded rear bumper) Overall Width: 96" Fifth Wheel Height: 47"±1" Rear Deck Height: 48"±1" Kingpin Location: 17 1/2" (From rear face of front bolster) Axle Spread: 61" Tridem Location: 25" (From rear face of rear bolster on slider to rear axle center) Tare Weight: 10,600 Lbs. (±2%) Gross Vehicle Weight Rating: 20' loaded 77,000LBS; 40' loaded 85,000LBS 3.Steel Structure & Components Material: High strength GR50, GR80 and GR130 steel Painting: E-coat primer (min. 20μm) and Powder coating topcoat (approx. 60μm). 7 years warrantyTopcoat color: Black RAL 9005 Metal preparation: Commercial abrasive blast of all metal surfaces to achieve clean bare steel.Four (4) corner portions on front and rear bolster, touching corner casting of container, shall be painted as Yellow RAL 1018 Main Beam: 16" x 5" fabricated I-beam with high strength flanges, 6 11/32" hight for GN rail Slider Beam: 14 3/4" deep x 5" wide fabricated I-beam, 2-pin locking system Crossmember: 3/16” and 1/4” thick fabricated channel type with triangular steel gussets Upper Coupler: 1/4" thick pick up plate w/ 2" dia. drain holes, reinforced by 1/4" thick channel type kingpin supportsSAF-Holland, Jost or Wallace Forge 2" AAR certificated kingpin Front Bolster: Dual position for front 20’ empty container and 40’ loaded container Intermediate Bolster: Fabricated with retractable twist locks, Hi-Lo intermediate bolsters fabricated with swing down twist locks Rear Bolster: 6 5/8" height x 4" wide fabricated box beam bolster with flip-up twist locks Rear Bumper: The bumper step should be designed so that the legally mandated reflective tape is mounted in a recessed area, to pre...