2027 CIE 20/40 CITY COMBO TANDEM CIE2040XTFTLAK Web

20'-40' City CB Tandem-CC402P5DF00 FET INCLUDED IN THIS PRICE Specifications 1. Function Carries one (1) 20' or (1) 40' ISO container Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE and TTMA specifications 2. General Overall Length: 40'-8" extended / 30'-6" retracted (Excluded rear bumper) Overall Width: 96" (Over tires) Fifth Wheel Height: 47"±1" Rear Deck Height: 48"±1" Kingpin Location: 24" (From rear face of front bolster) Axle Spread: 49" Tandem Location: 29 1/4" (From rear axle center to rear face of rear bolster) Tare Weight: 7,700 lbs. (±3%) Gross Vehicle Weight Rating: 52,350 lbs for 20' container 71,550 lbs for 40' container 3. Steel Structure & Components Material: High strength GR50,GR80. Painting: E-coat primer (min. 20μm) and Powder coating topcoat (approx. 60μm). 7 years warranty Topcoat color: Black RAL 9005 Main Beam: W12 @ 19lb/ft hot-rolled or fabricated H-beam, ASTM A572 Grade 50 or equivalent. Extension Beam: Fabricated 8-1/4" × 5-1/4" "H" beam with 3/8" thick flanges Locking System: Two (2) air operated locking pins, activation of locking pins through third gladhand on the front bolster. Crossmember: Fabricated channel type not less than 3/16" thick. Upper Coupler: 5/16" thick with 2" dia. drain holes, reinforced by 1/4" thick channel type kingpin supporters. SAF-Holland, Jost or Wallace Forge 2" AAR certificated kingpin Front Bolster: 8" wide × 10" high × 1/4" thick open section, w/ 3-1/2"chamfer in full length for gathering container in operation. One piece corner casting welded on both ends. Center Bolster: 5-7/8" wide × 3/8" thick top plate with 5" wide × 5" deep × 5/16" thick "U" type bottom channel. Rear Bolster: 8" wide × 3/8" thick top plate with 6-7/8" wide × 8" deep × 1/4" thick "U" channel. Rear Bumper: 4" × 4" square type step bar supported by H type posts. Locking Device: Two (2) Buffers 1213 or Toca equivalent front locking pins on front bolster Two (2) Buffers 3843R or Toca equ...